
Rincon front bumpers
|
Regular bumper on left, three section expanded metal bumper on right. Notice that all the expanded metal diamonds line up.
|
The long cross bars are one piece custom bent for strength.
They go through laser cut 7 GA. plate brackets and are plug welded on the ends, no plastic plugs!!
The bottom pipe is 13 ga. thickness to take extra abuse and protect winch fairleads.
The bumpers are smooth, no rough or sharp edges,
no welding spatter, and are fully welded.
No ugly welds!! Made in Hot Springs, Arkansas, USA by ATV-Guru!!
|
|
|
|
|
Bottom bar is 13 ga. thick pipe to protect winch fairleads. We also offer expanded metal in center section only.
|
Click banner below to check out more of our accessories.